Supero Super P6DNF, User Manual

Page: 23 / 106

2-3
Chapter 2: Installation
Unpacking
The system board is shipped in anti-static packaging to avoid static
damage. When unpacking the board, be sure the person handling
the board is static-protected.
2-3 Configuring System Board Jumpers
Use the following settings to configure your system board. Refer to
Figure 1-1 or Figure 1-2 for an illustration of the jumpers. Manufac-
turing jumpers are permanently fixed or preset in place on the sys-
tem board. You cannot move them. These jumpers are labeled on
the system board and are listed below as Manufacturer Settings.
Manufacturer Settings
J86: 1-2
J88: 1-2
J827: 1-2
J828 1-2
J829: 1-2
JP13: 2-3
JP15: 2-3
JP26: OFF
JP27: ON
JP38: OFF
JP88: OFF
JP880: 1-2 Default
2-3 CMOS Clear
JP42: ON (ISA CLK=PCI CLK/4)
OFF (ISA CLK=PCI CLK/3)