Supero Super P6DNF, User Manual

Page: 98 / 106

D-8
SUPER P6DNF/P6SNF User’s Manual
Check Point Description
8C Main and Video BIOS shadow successful. Setup op-
tions programming after CMOS setup about to start.
8D Setup options are programmed. The mouse check
and initialization will be done next.
8E The mouse check and initialization are done. Going for
hard disk reset.
8F The hard disk reset is complete. About to go for floppy
check.
91 Floppy setup is over. Test for hard disk presence to
be done.
94 Hard disk setup completes. About to set the base
and extended memory sizes.
96 Memory size adjusted due to mouse support, hard
disk type-47. Going to do any initialization before
C8000 optional ROM control.
97 Any initialization before C8000 optional control is over.
Checking the C8000 adaptor ROM, then passing
control to it next.
98 C8000 adaptor ROM has passed control to POST. Go-
ing to do any required processing after C8000 adaptor
ROM returns control next.
99 Any initialization required after optional ROM test over.
Going to set up timer data area and printer base ad-
dress.
9A Return after setting timer and printer base address.
Going to set the RS-232 base address.
9B Returned after RS-232 base address. Going to do any
initialization before coprocessor test.