37
CHANGING THE NEEDLE
Make sure that the needle is clear of the needle plate before attempting to change it. If the needle is not clear
of the needle plate, use the hand wheel to raise the needle.
Needle Plate
Needle
Needle Insert Hole
Needle Groove
When inserting the needle, be sure that the groove is
in the front and the scarf in the back. Improper
insertion of the needle will prevent the machine
from stitching correctly. A toothpick or other non-
metal item can be used to hold it straight while
tightening the set screw. The shaft of the needle
should be inserted completely into the needle bar.
Turning the needle slightly to the right at a very
slight angle can help the point of the hook catch the
thread with greater ease during the formation of the
stitch. This is particularly helpful when using
specialty threads.
Hand Wheel
CAUTION
STOP THE MACHINE BEFORE TURNING THE HAND WHEEL
MANUALLY.
CAUTION
If the needle is not inserted all the way to the top of the needle bar hole, the
timing of the machine will be off. Broken needles and thread breaks can result.
