SunStar SWF/B Series User Manual Download

Page: 11 / 159

This sticker warns against high voltage, electric shock and burn.

1) Only professional technicians should open any covers marked with this sticker.

2) Wait four minutes after turning the main switch to OFF before opening the cover.

TROUBLESHOOTING

Covers in the warning stickers refer to all covers near operating parts of the machine.

CONTENTS OF WARNING STICKERS

1) Before cleaning or repairing the machine, turn off the main power and wait for four minutes so that the

machine electricity is completely discharged. NOTE : When doing any routine troubleshooting, be aware

that it takes about10 minutes after turning off the main switch before the electricity is fully discharged

from the X/Y main shafts and drive box.

2) DO NOT change the settings or any parts on the machine without confirmation from SWF or its

distributors.

3) Use ONLY SWF parts on your machine.

4) Be sure to replace all covers when you are finished with your cleaning or repairs.

DANGER

If you should have any problems with your new machine, contact the A/S

Engineers at your SWF dealership. They are trained at SWF training centers

and are ready and able to assist you.

Summary of Contents for SWF/B Series
































































































































































Search results

Summary of Contents for SWF/B Series

Reviews:

Related manuals for SWF/B Series

Brands by name

Popular brands

SunStar SWF/B Series, User Manual

Search results

Summary of Contents for SWF/B Series

Reviews:

Related manuals for SWF/B Series

Brands by name

Popular brands