SunStar SWF/B Series User Manual Download

Page: 48 / 159

THREAD –BREAK DETECTING UNIT

The thread-break detecting unit contains rollers which sense the smooth rotation of the thread which

determines if there has been a break in the upper or lower thread. Any dust, thread remnants, etc. will

interfere with the roller’s rotation and prevent detection of broken thread. Therefore, It is important to

always keep the rollers and bush bearings clean and free of dust and dirt.

To clean the thread-break detecting unit, remove the cover of the thread tension adjusting plate, separate the

cables and unscrew the roller base joint screw.

Use a soft brush of canned air to clean the rollers and bush bearings and then reassemble the unit.

Roller Base Screw

Thread Detecting Roller

Bush Bearing

Roller Base

Film

NOTICE

Be sure to place the thread detecting board in the correct position or the unit will

not operate.

Summary of Contents for SWF/B Series
































































































































































Search results

Summary of Contents for SWF/B Series

Reviews:

Related manuals for SWF/B Series

Brands by name

Popular brands

SunStar SWF/B Series, User Manual

Search results

Summary of Contents for SWF/B Series

Reviews:

Related manuals for SWF/B Series

Brands by name

Popular brands