73
Press the DOWN key once.
X[mm]
:
96.5
Y[mm]
:
135.0
ANGLE
:
45
MIRROR
:
OFF
The length of X and Y have changed, and the
ANGLE has been setup as 45.
SUB WORK
These functions can be used before the embroidery work begins.
Press
when the machine is on and the operating system has loaded.
The following screen appears:
■
BOBBIN WINDING
1. BOBBIN WINDING
2. DESIGN TRACE
3. LENGTH MEASURE
4. OPTIMIZE TRACE
BOBBIN WINDING: Winds the bobbin thread. (If the
optional Bobbin Winder is installed).
DESIGN TRACE: Checks the outline area of the design
(perimeter trace).
LENGTH MEASURE: Measure the length between two
selected points.
OPTIMIZE TRACE: Traces the actual shape of the design.
Move the cursor on sub-menu to
“1.BOBBIN WINDING”.
Pressing winding lever, then
winding start.
1. BOBBIN WINDING
2. DESIGN TRACE
3. LENGTH MEASURE
4. OPTIMIZE TRACE
BOBBIN WINDING
PRESS START KEY
Press
Press