SunStar SWF/B Series User Manual Download

Page: 94 / 159

INC SPEED: (Inching speed) Determines the sewing machine speed when the embroidery work begins.

This is called Inching. The default for the single-head machine is 180 rpm, and 100 rpm for the four-head

machine. The speed can be varied from 50 rpm to 200 rpm in increments of 10 rpm.

SLOW SPEED: The operator can work at a low speed on a particular part of a design by selecting:

The low embroidery speed can be set up for the same minimum to the maximum speed as

mentioned above. The speed is set increments of 10 rpm.

POWER ORG: Determines if the machine will search for the origin automatically when to power is ON.

The default is NO (0). To set up for YES input (1).

FRAME SPEED: Sets the speed at which the embroidery frame returns during automatic origin return or

offset movement. The default setting is LOW (0). and you can change to high speed mode HIGH by pressing

(1).

SPEED DATA: Allows the sewing speed to be slowed when heavy weight materials are being stitched. The

default setting is HIGH (1). When LOW (0) is selected, the speed is decreased by 30~50 rpm.

COVER SWITCH: When the thread take-up cover is opened during operation, the machine automatically

stops. Enter DISABLE to not use this safety function for Cover Switch.

SWF/

-T1201C

SWF/

-T901C

SWF/

-T601C

180

Basic default of Inching speed

Type

Sewing Materials

Summary of Contents for SWF/B Series
































































































































































Search results

Summary of Contents for SWF/B Series

Reviews:

Related manuals for SWF/B Series

Brands by name

Popular brands

SunStar SWF/B Series, User Manual

Search results

Summary of Contents for SWF/B Series

Reviews:

Related manuals for SWF/B Series

Brands by name

Popular brands