SunStar SWF/B Series User Manual Download

Page: 110 / 159

104

THE FLOPPY DRIVE AND DISK

Press when the operating system has loaded and the following sub menu will appear:

FDD SAVE/ FDD DELETE

LESSON: Format a 2HD floppy disk and copy designs from Location #5 onto the disk in SWF format.

Then delete the copied designs from the disk.

1. FDD SAVE

2. FDD DELETE

3. FDD FORMAT

FDD SAVE: Saves the memory data onto the floppy disk

FDD DELETE: Deletes designs on the floppy disk

FDD FORMAT: Formats the floppy disk

Move the cursor to “3. FDD
FORMAT” to format the floppy
disk. Then, press

After moving the cursor to “YES”,
Press

DO YOU WANT FORMAT ?

[YES] [NO]

DISKETTE TYPE

[2HD] [2DD]

Move the cursor to “2HD” to set
the disk type as “2HD”. Then,
Press

Summary of Contents for SWF/B Series
































































































































































Search results

Summary of Contents for SWF/B Series

Reviews:

Related manuals for SWF/B Series

Brands by name

Popular brands

SunStar SWF/B Series, User Manual

Search results

Summary of Contents for SWF/B Series

Reviews:

Related manuals for SWF/B Series

Brands by name

Popular brands