SunStar SWF/B Series User Manual Download

Page: 104 / 159

■

POWER RESUME

If the frame moves during a power failure, use this function to move it back to where it was when the power

failure occurred.

The automatic frame transfer functions are carried out by the three menus above: DATA ORIGIN;

ORIGIN; POWER RESUME. The frame stops when the STOP Switch is pressed during frame transfer.

After this you can move the frame using the frame transfer key or, if you press the START switch, the frame

will move to its destination.

A. Starting point of embroidery

B. Stopping point of embroidery

C. Frame transfer course

A. Starting point of automatic frame transfer

B. Emergency stopping point activated by moving

the bar switch to the left.

C. Point of frame reached by using the frame transfer

key.

D. The original doing reached by moving the bar

switch to the right.

E. The transfer course of the automatic frame

transfer with no emergency stop performed

Summary of Contents for SWF/B Series
































































































































































Search results

Summary of Contents for SWF/B Series

Reviews:

Related manuals for SWF/B Series

Brands by name

Popular brands

SunStar SWF/B Series, User Manual

Search results

Summary of Contents for SWF/B Series

Reviews:

Related manuals for SWF/B Series

Brands by name

Popular brands