SunStar SWF/B Series User Manual Download

Page: 38 / 159

BOBBIN WINDER

Winding Lever

Winding Shaft

PUSH

Insert the bobbin onto the shaft and wind the thread manually five or six times around the bobbin in the

desired direction. Press the lever to wind the thread.

80%

Fill the bobbin 80% and make sure that the thread is

parallel to the bobbin.

You can adjust the amount of thread on the bobbin

by unfastening the screw of the adjusting plate and

moving it in a clockwise direction for more thread

and a counterclockwise direction for less thread.

After adjustment is completed, be sure to retighten

the adjusting plate screw.

Adjusting Plate

CAUTION

Be careful not to overfill the bobbin as this will interfere with the smooth flow of

the bobbin thread. Filling the bobbin to the recommended 80% capacity will

render approximately 80 cm of thread

Summary of Contents for SWF/B Series
































































































































































Search results

Summary of Contents for SWF/B Series

Reviews:

Related manuals for SWF/B Series

Brands by name

Popular brands

SunStar SWF/B Series, User Manual

Search results

Summary of Contents for SWF/B Series

Reviews:

Related manuals for SWF/B Series

Brands by name

Popular brands