22
0
3) INDICATOR LIGHTS
This display has lights to indicate FIX POS (Fixed Position) which indicates the main shaft is not
moving. RUN MODE indicates that the machine is ready to accept and run the design.
0
4) MENU CHOICE BUTTON
This button selects the desired menu.
0
5) NUMBER BUTTONS
These buttons are used to select a different needle bar(color). To select a needle bar above the number
10, use the “+10”key and any other number needed.
0
6) THE STOP BUTTON
For reverse sewing or stopping the machine, use THE STOP BUTTON OR SWITCH.
0
7) THE START BUTTON
Use this button to start the machine.
0
8) FRAME MOVEMENT BUTTON and MOVEMENT SPEED ADJUSTING BUTTON
Use the buttons on this small control unit to move the frame up, down, left and right. The buttons that
activate the INDICATOR LIGHTS are used for frame movement speed adjustment (low, medium and
high)
0
9) MAIN SHAFT SPEED CHANGE BUTTON
When you want to change the speed of the main shaft during operation, press UP to increase the speed
and DOWN to decrease the speed.
10) EMERGENCY BUTTON
This button stops the machine IMMEDIATELY and should be used in emergency situations only.
FUNCTION OF SET BUTTON
1) Selection of menu
2) Number input setting
3) Work Completion: When the machine stops during operation, press and hold the set button until you
hear a beeping sound. Then press the SET button again until the RUN MODE indicator light appears.
CAUTION
To change the needle bar during use, press the CL key after selecting the number
of the needle bar using the corresponding number button.
