Sun Microsystems Sun Netra CP3260, User Manual

Page: 4 / 144

iv Netra CP3260 Blade Server User’s Guide • April 2009
2.4 Installation Procedure Summary 2–4
2.5 Configuring On-Board Hardware 2–5
2.5.1 Adding or Replacing FB-DIMM Memory Modules 2–5
2.5.1.1 To Remove FB-DIMM Memory Modules 2–10
2.5.1.2 To Install FB-DIMM Memory Modules 2–11
2.5.2 Adding or Replacing Compact Flash Card 2–13
2.5.3 Adding or Replacing TOD Clock Battery 2–14
2.6 Installing an Advanced Rear Transition Module (Optional) 2–18
2.7 Installing the Netra CP3260 Blade Server 2–21
2.8 Connecting External I/O Cables 2–23
2.9 Hot-Swapping the Netra CP3260 Blade Server 2–25
3. Software Installation 3–1
3.1 Operating Systems and Patches 3–1
3.2 Configuring Payload OS NIU Driver for Multiplexing to Zones 2 and 3 3–
2
3.3 Installing as a Diskless Clients 3–4
3.3.1 Creating a Boot Server for Diskless Clients 3–4
3.3.2 Adding a Diskless Client 3–5
3.3.3 Determining Local Network IP Addresses and Host Names 3–7
3.4 Firmware Updates 3–8
3.5 Configuring for 1-GbE or 10-GbE Switches 3–8
3.6 Downloading and Installing SunVTS Software 3–9
3.7 Formatting the Optional Compact Flash Card 3–10
4. Firmware and Blade Server Management 4–1
4.1 System Firmware 4–2
4.2 Power-On Self-Test Diagnostics 4–3
4.2.1 POST Test Coverage 4–3
4.2.2 POST Diagnostic and Error Message Format 4–4