Sun Microsystems Sun Netra CP3260, User Manual

Page: 124 / 144

A-6 Netra CP3260 Blade Server User’s Guide • April 2009
FIGURE A-4
Front Panel Serial Port Diagram
TABLE A-3
shows the serial port connector pin assignments.
A.4.2 Compact Flash Connector
The Compact Flash connector is a type I/II connector.
A.4.3 Midplane Power Connector (Zone 1)
The Netra CP3260 blade server uses a Zone 1 power connector. It provides support
for the following signals:
■
Two
−
48 volt DC power feeds (four signals each; eight signals total)
■
Two IPMB ports (two signals each, four signals total)
■
Geographic address (eight signals)
The analog test and ring voltage pins are left unconnected.
TABLE A-3
Serial Port
RJ-45
Connector Pinouts
Pin
Signal
Name
Function Pin
Signal
Name
Function
1 RTS Request To Send 5 GND Ground
2 DTR Data Terminal Ready 6 RXD Receive Data
3 TXD Transmit Data 7 DSR Data Set Ready
4 GND Ground 8 CTS Clear To Send
I0I0I
1 2 3 4 5 6 7 8