Sun Microsystems Sun Blade 100, Service Manual

Page: 67 / 222

Chapter 3 Power-On Self-Test 3-15
3.6 Bypassing POST
To bypass POST:
● At the system prompt, type:
3.7 Resetting Variables to Default Settings
To set the system NVRAM parameters to the original default settings:
●
At the system prompt, type:
3.8 Initializing Motherboard POST
To initialize the motherboard POST:
1. Power off the system.
2. Before replacing the motherboard, remove any optional components, such as PCI
cards, then repeat the POST.
Ethernet address 8:0:20:cf:46:11, Host ID: 61067537.
Power On Self Test Failed. Cause: DIMM2
ok
ok% setenv diag-level? off
ok% setenv diag-switch? false
ok% set-defaults
CODE EXAMPLE 3-3
Typical Error Code Failure Message