Sun Microsystems Sun Blade 100, Service Manual

Page: 132 / 222

7-12 Sun Blade 100 Service Manual • October 2000
1. Position the CD-ROM or DVD-ROM drive in the chassis (
FIGURE 7-6
).
2. Push the CD-ROM or DVD-ROM drive toward the chassis rear.
3. Connect the following to the rear of the CD-ROM or DVD-ROM drive:
■
CD-ROM or DVD-ROM drive cable connector
■
Power cable connector
Note – Ensure that the cable assembly connectors are properly oriented by aligning
the connector keys.
4. Using a No. 2 Phillips screwdriver, replace the two screws securing the CD-ROM
or DVD-ROM drive to the chassis.
5. Detach the wrist strap, replace the system cover, and power on the system as
described in Chapter 9 “Finishing Component Replacement.”