SUEZ © 2018
DLM 71000-03 EN
Rev. B
Chapter 5: System Configuration
MESSAGES
This option will print out the message log, containing the error and warning messages and their number of
occurrences during the life of the Analyzer.
CAL. CONSTANTS
This option will print the calibration constants for the Analyzer.
SYSTEM CONFIG
This option will print the system configuration of the Analyzer.
SYSTEM CONST
This option prints the system constants for the conductivity cell of the Analyzer.
MAINTENANCE
This option will print the maintenance status of the five maintenance items.
To print any of these options:
1. Use the
UP
and
DOWN
arrow keys to highlight the desired option and press
.
2. Press
EXIT
to return to the
Main Menu
.
Main Menu: Started State Options
When the Analyzer is performing a mode of operation it is in the started state and the
Main Menu
options
are different, as shown in Figure 11. Note that the
START
key has been replaced with a
STOP
key and the
SETUP
key has been replaced with a
TOOLS
key. Pressing
VIEW
,
INFO
or
has the same function
as previously discussed.
Figure 11: Front Panel Display showing the Main Menu in the Started State
Summary of Contents for Sievers UPW Boron Analyzer
Page 4: ...SUEZ 2018 4 of 104 DLM 71000 03 EN Rev B THIS PAGE IS INTENTIONALLY LEFT BLANK...
Page 16: ...SUEZ 2018 16 of 104 DLM 71000 03 EN Rev B THIS PAGE IS INTENTIONALLY LEFT BLANK...
Page 103: ...Notes SUEZ 2018 103 of 104 DLM 71000 03 EN Rev B 104...
Page 104: ...Notes SUEZ 2018 104 of 104 DLM 71000 03 EN Rev B 104...
