Global 400 User Manual
42 of 85
v1.1 revision 1
Chapter 3: Configuring the unit
2 February 2016
This setting determines if the Batch Reset button is available on the Run screen.
Radio transmits
Default: 3
This setting controls how many times a tool radio will attempt to send a result before giving up.
In general, this setting does not have to be changed, but if tool communication is not working
reliably, changing this setting may improve communication.
Not all tools support this setting. Only click tools with code 1.13 or later and holding tools
support this setting. This setting is only sent to a tool during the learn process
Serial printer format
Default: None
Values: None, Line, CSV
This setting determines the format used for serial printing of tightenings.
Bypass Verify Inputs
Default: no
This setting determines if the Verify Tool and Verify Socket inputs are ignored. See the
GIM400 User Manual for more information about the inputs.
Startup Operation
Default: Last
Values: Last, None
This setting what operation will be run on unit startup. If set to Last, the last running operation
when the unit turned off will be restarted at the beginning of the operation when the unit turns
on. If set to None, the unit will be in the No active parameter state on startup.
Enter new Password
Figure 43: Enter new Password screen
Function keys
1.
REMOVE – Clears the unit password and returns to the Unit Setup screen.
2.
No function
