Global 400 User Manual
11 of 85
v1.1 revision 1
Chapter 1: Overview
2 February 2016
Unit Overview
The Global 400 is equipped with a color LCD display, four function
keys immediately below the LCD, a numeric keypad with decimal
point, navigation keys, and enter and escape buttons. The current
function of the function keys is indicated at the bottom of the LCD
above the button.
The beeper provides an audio indication for any combination of
accepts, rejects, and batch completions. The beeper volume can be
adjusted through the user interface. (See the
Unit Setup
section in the
next chapter.)
The Global 400 has two RJ-45 Ethernet ports to allow it to be used in a
chain or ring network configuration.
The USB-A connector is used to provide firmware updates via a
standard USB drive.
The RS232 DSUB9 connector can be used with a serial barcode reader
or serial printer.
The 5-pin remote connector connects to other devices that provide I/O
capabilities.
The power plug accepts 100-240 VAC at 50-60 Hz.
Compatible Tools
The Global 400 works with the following models of tools:
•
SLTC-FM 2.4 GHz preset clicker-type torque wrenches
•
1100-Series Exacta 2 digital torque wrenches
•
PST series air tool transducers
•
Holding wrenches