Global 400 User Manual
24 of 85
v1.1 revision 1
Chapter 3: Configuring the unit
2 February 2016
Key
New name
8
T
6
TM
6
TN
6
TO
right arrow
TO_
6
TOM
6
TON
6
TOO
5
TOOJ
5
TOOK
5
TOOL
right arrow
TOOL_
right arrow
TOOL _
1
TOOL 1
(Since neither 1 nor 0 have associated letters, pressing them will only enter the number.)
Once you have entered the desired name, press
Save
. This does not permanently save the value
just entered. You must also save from the screen that sent you to the letter screen. If you no
longer want to change the value, press
Cancel
. At this point, the unit will return to the previous
screen without changing the value.
Main Menu
Figure 14: Main menu
The Global 400 menu provides the entry point to configure and control the unit. You must enter
the box password before entering the menu from the Run screen. If you cannot remember the
password, you may reset it to the factory default (0104) by entering the sequence “6853.48” on
the Run screen. Use the arrow keys to navigate to the desired entry and press ENT to go to the
entry’s screen. To exit the menu, press ESC or navigate to
LOCK & RETURN
or
RETURN
and press ENT. Pressing ESC or
LOCK & RETURN
will “lock” the menu and return to the
Run screen, requiring the password to be reentered before the menu can be accessed again.
Pressing
RETURN
will return to the Run screen without locking the unit, allowing the menu to
be reentered without entering the password.
