Global 400 User Manual
14 of 85
v1.1 revision 1
Chapter 2: Using the unit
2 February 2016
Run Screen
The run screen shows which parameters the unit is currently running. Depending on the number
of active parameters, the run screen will be in one of several modes.
Figure 1: No active parameter
Figure 2: Suspended
Figure 3: 1 active parameter
Figure 4: 2-4 active parameters
Tightening Notifications
Every time a tightening is received from a running tool, the background of the area of the screen
showing the current parameter and batch count for the tool will be shaded with a color indicating
the status of the tightening.
•
Red – A rejected tightening occurred.
•
Green – An accepted tightening occurred that did not complete a batch.
•
Blue – An accepted tightening occurred that completed a batch. If the qualifier NOKs setting
is set to Count, this further indicates that no rejected tightenings were counted towards this
batch.
•
Yellow – An accepted or rejected tightening occurred that completed a batch. This color will
only occur when the qualifier NOKs setting is set to Count and one or more rejected
tightenings were counted towards the current batch.