Global 400 User Manual
26 of 85
v1.1 revision 1
Chapter 3: Configuring the unit
2 February 2016
Figure 21: Tool Edit Screen - Click
Figure 22: Tool Edit Screen - Digital
Figure 23: Tool Edit Screen - Air
Figure 24: Tool Edit Screen - Holding
Function keys
1.
FORGET – Removes the tool from the unit.
2.
No function
3.
SAVE – Saves changes made to the tool configuration.
4.
CANCEL [ESC] – Cancels changes made to the tool configuration.
Name
The tool name can be up to 25 numbers, letters, or decimal points.
The tool name is shown on screen when running a parameter that uses the tool but is not reported
to the network.
Radio Info
The radio info shows the radio address and the firmware version used by the radio to
communicate with the qualifier.
This field cannot be edited.
Serial Number
The tool serial number can be up to 14 numbers, letters, or decimal points.
The tool serial number is reported to the network with tightenings performed by the tool but is
not shown anywhere on screen besides this menu.
