Stryker SV1, Operation Manual

Page: 14 / 1124

E En ng glliis sh h
E EN N
1-8 KK-7100 REV 02 www.stryker.com
Introduction
This manual assists you with the operation or maintenance of your Stryker product. Read this manual before operating or
maintaining this product. Set methods and procedures to educate and train your staff on the safe operation or
maintenance of this product.
CAUTION
• Improper usage of the product can cause injury to the patient or operator. Operate the product only as described in
this manual.
• Do not modify the product or any components of the product. Modifying the product can cause unpredictable
operation resulting in injury to patient or operator. Modifying the product also voids its warranty.
Notes
• This manual is a permanent part of the product and should remain with the product even if the product is sold.
• Stryker continually seeks advancements in product design and quality. This manual contains the most current
product information available at the time of printing. There may be minor discrepancies between your product and
this manual. If you have any questions, contact Stryker Customer Service or Technical Support at + 90 (352) 321 43
00 (pbx).
Product description
SV1 is an AC-powered bed with a battery backup system. SV1 is for patients to receive treatment for extended periods of
time at hospitals and care centers. SV1 has four electrical actuators that allow it to adjust to numerous positions,
including CPR, Trendelenburg, Reverse Trendelenburg , and chair positions. SV1 is equipped with retractable siderails,
removable headboard and footboard, and options and accessories that assist with the care of the patient.
SV1 is an electromechanical MedSurg and ICU bed with DC-powered actuators and controls to adjust the patient sleep
surface. The patient sleeping surface consists of four sections: the backrest, seat, upper leg section, and lower leg
sections. Siderails are split, with two siderails on the head end, and two siderails on the foot end. The siderails secure in
the full up position. When unlatched, siderails open outside and move to the lowest position.
You can actuate electromechanical functions with the siderail control panel, patient control pendant, and nurse control
pendant. The control box consists of logic controls and a power supply that power and control signals to all four actuators
via a distribution box. The siderail control panels, patient control pendant, and nurse control pendant controls are also
controlled by the control box via distribution box.
The bed is equipped with two pairs of actuators (four actuators total). The first pair below the litter surface control the
backrest down and up functions, and upper leg down and up functions. The second pair of actuators below the
undercarriage control the litter down and up functions, Trendelenb urg, and Reverse Trendelenburg .
Additional bed mechanisms allow for manual CPR, knee gatch motion, and bed length extension. The bed is also
equipped with brake and steer control for the casters. Casters help in emergency or non-emergency intra-hospital
transport of a patient on the bed.
Intended use
SV1 is for use by human adult patients in a MedSurg and ICU setting requiring the support of a hospital bed.
Operators for the bed include healthcare professionals (such as nurses, nurse aides, and medical doctors), service or
maintenance personnel, patients, and bystanders who can use bed motion functions.
SV1 is for use in medical, surgical, and critical care healthcare environments, including hospitals, institutions and clinics.
The SV1 bed frame, litter mounted accessories, and mattresses can come in contact with human skin.