Stryker 0702-002-620, Service And Installation Manual

Page: 117 / 232

Stepper Motor P/N 0702-014-123
1. The wire harness attached to the
docker power coupler assembly
(P/N 0702-014-
114) (F) is secured by two cable ties to the
actuator base frame
(P/N 0702-014-101)
(D).
Carefully
cut the cable ties to remove the wire harness.
2. Using a 3/16” allen wrench, remove two
actuator alignment rods
(P/N 0702-014-104)
(A) from
actuator interface
(P/N 0702-014-110) (B).
3. Separate the
actuator interface
(P/N 0702-014-110) (B) from the
actuator base frame
(P/N 0702-014-101) (D) and set aside the three
compression springs
(P/N 0038-585-
000) (C).
4-10