Stryker 0702-002-620, Service And Installation Manual

Page: 114 / 232

4. Using a 1/8” allen wrench remove four
socket flat countersunk head cap screws
(P/N
0004-346-000) (L) and separate the
actuator strike plate
(P/N 0702-014-111) (B) by
lifting it upwards.
Caution:
the
extended hall sensor
(P/N 0702-014-119) (H), the
rover hall sensor
(P/N
0702-014-106) (E), the
hall sensor
(P/N 0702-014-906) (J), and the
docker power coupler
assembly
(P/N 0702-014-114) (F) are all mounted to the strike plate. Each component has
a wiring harness attached to it. Be careful not to get the connectors caught on anything
when the removing the
actuator strike plate
(P/N 0702-014-111) (B).
5. Using a 1/8” allen wrench, remove two
socket flat countersunk head cap screws
(P/N 0004-346-000) (L).
6. Remove the
docker power coupler assembly
(P/N 0702-014-114) (F) and set aside.
4-7