NOTICE
Risk of damage due to the incorrect tight-
ening torque
An incorrect tightening torque can lead to damage that
may even include components breaking.
► Observe the tightening torque.
4. Tighten the cylinder cover (4) with the cylindrical
screws (11).
Use liquid screw locking agent if necessary, see
section 4.3.
Mounting the
brake
1. Mount and secure the brake, see section 6.4.1.
Assembly of the
pressurised me-
dium line
1. Mounting the pressurised medium line, see section 6.4.2.
8.4.3
Replace the sealing rings
DANGER
Risk of accidents caused by components subjected to spring pressure
Disassembly work on the brakes that is not carried out correctly may lead to the sudden release of
the pressure springs, which can lead to serious injuries.
► Any disassembly or maintenance work should be carried out by Stromag. For this purpose, re-
quest a qualified specialist approved by Stromag or remove the brake, see section 8.4.1, and send
it to Stromag, see section 11.2.
► The procedure described in this documentation must be followed precisely.
NOTICE
Damage to the brake caused by sharp or pointed tools
Replacing parts using sharp or pointed tools may lead to damage.
► Do not use any sharp or pointed tools.
► Handle with extreme caution.
► Wherever possible, use assembly aids.
Disassembly of
the brake
1. Disassemble brake, see section 8.4.1.
36
Mounting instructions Pressure-operated spring-actuated multi-disc brake KMB-ZM, KLB-ZM • No. 777-00001 D • 10/2017
