StorageTek L180, Service Manual

Page: 229 / 266

95897 Fifth Edition A-3
Power System
Power Specifications
Table A-2 lists library power specifications.
Power Cables
For each library, the customer must order the power cable and supply the
correct receptacle.
Table A-3 on page A-4 lists the StorageTek part number for the cable and plug
type as determined by:
• Input voltage (first column)
• Country (second column) where the library is to be installed
• Which type of drive is installed in the library (remaining columns)
Note: If the library configuration contains a mixture of drive types, the
customer must order the part number listed in the far right column.
Table A-2. Library Power Specifications
Power cable U.S. and Canada:
100 to 127 VAC UL/CSA power cable
International:
200 to 240 VAC HAR power cable
Input voltage range 100 to 127 VAC / 200 to 240 VAC
Input current Library: 1.0 A at 120 VAC (0.5 A at 240 VAC)
Power configuration
(3 wire) U.S. and Canada:
Single-phase 100 to 127 VAC, 50/60 Hz, 15 A Service
International:
Single-phase 200 to 240 VAC, 50/60 Hz, 10 A Service
Power consumption Library only: 120 W
Heat output Library only: 410 Btu/hr (maximum)
Note: For information about the tape drives, see:
• DLT 7000, DLT 8000, SDLT: Refer to the DLT manuals.
• 9840: Refer to the 9840/T9840 manuals.
• Ultrium: Refer to the specific manufacturer’s manual.