StorageTek L180, Service Manual

Page: 66 / 266

Configuration Overview
2-22 Fifth Edition 95897
Note: To reset the screen characteristics to the default values, line up the
cursor with
RESTORE DEFAULTS
and press the SELECT button.
5. When the value is correct, press the
SELECT
button to save the changes.
Press the
MENU
button to abort.
Cleaning Cartridge Warning Count
The Cleaning Info Menu provides information about the library’s cleaning
cartridges, lets you change the warning count for each type of cleaning
cartridge, as well as import and export cleaning cartridges from the library.
This menu also lets you check the number of times a cleaning cartridge has
been used.
Figure 2-9 shows an example of the cleaning information screen.
Cleaning cartridges have a limited life span. After multiple uses, a cleaning
cartridge must be replaced and disposed of.
If you have enabled the Auto Clean feature, you can use the operator panel to
set the maximum number of times a cleaning cartridge can be used (or the
“warning count”).
• For DLT drives, the product manual specifies that you can use a DLT
cleaning cartridge a maximum of 20 times.
• For 9840 cartridges, refer to the 9840/T9840 Tape Drive User’s Reference
Manual
.
• For Ultrium cartridges, refer to the specific manufacturer’s documentation.
Note: The Auto Clean feature is automatically enabled if you insert even one
cleaning cartridge into the reserved cell area and then reset the library.
Figure 2-9. Cleaning Information Menu
CLEANING INFO
NUM CLEAN CARTRIDGES: 00
DLT WARN COUNT: 000
9840 WARN COUNT: 000
HP LTO WARN COUNT: 000
IBM LTO WARN COUNT: 000
SGT LTO WARN COUNT: 000
EXPORT CARTRIDGES
IMPORT CARTRIDGES
CLEAN CARTIDGE INFO