StorageTek L180, Service Manual, Page: 153 / 266

95897 Fifth Edition 4-63
MPV Card
9. If necessary, place the SCSI cable loop in the lower cable clamp and close the clamp.
1. SCSI cable
2. Lower cable clamp
CAUTION:
Possible ESD damage: Follow the ESD precautions outlined in
“Electrostatic
Discharge Damage Prevention” on page xxiii .
10. Remove the MPU or MPW card from the anti-static bag.
11. Hold the card so that the card connector aligns with the MPV card connector (circuit side
out, components facing the MPC card).
CAUTION:
Fibre safety: See
“Fiber Optic Safety” on page xxviii for compliance information and
safety precautions.
12. Slide the MPU or MPW card into the groove in the rail in the lower slot , and gently push
it in until it mates with the MPV card connector.
1. MPU or MPW card
2. Groove in rail
C67233
1
2
C67282
1
2