StorageTek L180, Service Manual

Page: 63 / 266

95897 Fifth Edition 2-19
Configuration Overview
Setting the Library Name
The system administrator might assign the library a name. The name is mapped
to the IP address but does not affect operation.
To set this value:
1. At the Network Config Menu, press an arrow button until the cursor
underscores
LIBRARY NAME
.
2. Press the
SELECT
button. An editing screen appears.
3. On the editing screen:
a. Use the up and down arrow buttons to select a value for each character
(field) in the name.
b. Use the
SELECT
button to move right to the next field.
c. Use the
MENU
button to move left to the previous field.
Note: Do not enter a library name longer than 30 characters.
4. When the screen displays your desired setting, press the SELECT button
twice to save the changes. Press the
MENU
button to abort.
Setting the IP Address
The system administrator might assign the library an IP address, which makes
the library accessible through a network.
Note: To use the Horizon L Series Library Monitor, you must set the library’s IP
address at the operator panel.
To set the IP address:
1. At the Network Config Menu, press an arrow button until the cursor
underscores
IP ADDRESS
.
2. Press the
SELECT
button. An editing screen appears.
3. On the editing screen:
a. Use the up and down arrow buttons to select a value for each digit
(field) in the address.
b. Use the
SELECT
button to move right to the next field.
c. Use the MENU button to move left to the previous field.
4. When the screen displays your desired setting, press the
SELECT
button
from the right-most field to save the changes. Press the
MENU
button to
abort.