Still RX70-40 Original Instructions Manual Download Page 83

Page: 83 / 392

Operation

Checks and tasks before daily use

Climbing into and out of the truck

WARNING

Risk of injury when climbing into and out of the

truck due to slipping, striking parts of the truck or

becoming stuck!
If the footwell cover is very dirty or smeared with oil,

there is a risk of slipping. There is a risk of hitting

your head on the overhead guard post or of your

clothes becoming stuck when climbing out of the

truck.
– Ensure that the footwell cover is non-slip.
– Do not jump into or out of the truck.
– Ensure that you have a secure grip on the truck.

WARNING

Risk of injury when jumping out of the truck!
If your clothing or jewellery (e.g. watch, ring etc.)

becomes stuck on a component while you are

jumping out of the truck, this can lead to serious

injuries (e.g. from falling, loss of ﬁngers etc.). It is

forbidden to jump out of the truck.
– Do not jump out of the truck.
– Do not wear jewellery at work.
– Do not wear loose-ﬁtting workwear.

CAUTION

Components may become damaged through

incorrect use!
Truck components, such as the driver's seat,

steering wheel, parking brake lever etc., are not

designed to be used for climbing in and out of the

truck and can be damaged due to misuse.
– Only use the ﬁttings speciﬁcally designed for the

purpose of climbing into and out of the truck.

57348011850 EN - 02/2019 - 11

Summary of Contents for RX70-40









































































































































































































































































































































































































Search results

Summary of Contents for RX70-40

Reviews:

Related manuals for RX70-40

Brands by name

Popular brands

Still RX70-40, Original Instructions Manual

Search results

Summary of Contents for RX70-40

Reviews:

Related manuals for RX70-40

Brands by name

Popular brands