Still RX70-40, Original Instructions Manual

Page: 311 / 392

Operation
4
Transporting the truck
Type-Modèle-Typ / Serial no.-No. de série-Serien-Nr. / year-année-Baujahr
Rated capacity
Capacité nominale
Nenn-Tragfähigkeit
Battery voltage
Tension batterie
Batteriespannung
Rated drive power
Puissance motr.nom.
Nenn-Antriebsleist.
Unladen mass
Masse à vide
Leergewicht
max
min.*
* see Operating instructions
voir Mode d'emploi
siehe Betriebsanleitung
kg kg
kg
kg
kg kW
V
*
D-22113 Hamburg
Berzeliusstr. 10 2
1
Determining the loading weight
– Park the truck securely; see ⇒ Chap-
ter "Parking the truck securely and switch-
ing it off", P. 4-144.
– Determine the unit weights by reading them
off the truck nameplate and, if necessary,
the attachment (variant) nameplate.
– Add the determined unit weights to obtain
the loading weight of the truck:
Tare weight (1)
+ Ballast weight (variant) (2)
+ Attachment net weight (variant)
= Loading weight
.
Hooking on the lifting straps
CAUTION
Harnesses may damage the truck's paintwork!
Harnesses may damage paintwork by rubbing and
pressing on the surface of the truck. Particularly
hard or sharp-edged harnesses, such as wires or
chains, can quickly damage the surface.
– Use textile harnesses, e.g. lifting straps, with
edge protectors or similar protective devices if
necessary.
DANGER
There is a risk of being hit if the hoists and harnes-
ses fail and cause the truck to fall, with potentially
fatal consequences!
– Use only hoists and harnesses with sufficient
load capacity for the determined loading weight.
– Use only the truck's designated lifting points.
– Make sure that harnesses, such as hooks,
shackles, belts etc., are only used in the indi-
cated load direction.
– The harnesses must not be damaged by truck
parts.
NOTE
The lifting points are indicated by a hook
symbol.
57348011850 EN - 02/2019 - 11 299