Still RX70-40 Original Instructions Manual Download Page 278

Page: 278 / 392

Operation

Display messages

DANGER

Risk of accident!
– The speed must be adjusted to suit the driving

situation!

The increased safety provided by this function must

not be misused in order to take safety risks.

ARE YOU SURE ? message

If the message

ARE YOU SURE ?

appears on

the display, a prior prompt is veriﬁed.
– Press the corresponding softkey on the

display and operating unit to continue or to

cancel the operation.

SEAT SWITCH message

The truck is equipped with a seat switch.
If the

SEAT SWITCH

message appears, the

driving functions and the working hydraulics

are blocked.
The

SEAT SWITCH

message is triggered by

the following situations:
• The seat switch is not actuated while the

accelerator pedal or steering wheel is

actuated

• The seat switch is not actuated while the

operating device for the working hydraulics

is actuated

• The shift time has been exceeded
• The operating time has been exceeded

NOTE

The operating devices shown in the following

illustrations are only examples and may differ

from the equipment in your truck.

266

57348011850 EN - 02/2019 - 11

Summary of Contents for RX70-40









































































































































































































































































































































































































Search results

Summary of Contents for RX70-40

Reviews:

Related manuals for RX70-40

Brands by name

Popular brands

Still RX70-40, Original Instructions Manual

Search results

Summary of Contents for RX70-40

Reviews:

Related manuals for RX70-40

Brands by name

Popular brands