Still RX70-40 Original Instructions Manual Download Page 124

Page: 124 / 392

Operation

Operating the display-operating unit

BQ_030_en_V2

ESC

The display changes to the

PASSWORD

menu.

NOTE

It may be necessary to enter a password in

order to conﬁgure the displays. This depends

on the conﬁguration of the display-operating

unit.

•

For conﬁguration of the display-operating

unit, contact the authorised service centre

7312_003-056_en_V3

ESC

– Press the Softkey

(3).

The display changes to the

CONFIGURA-

TION

menu.

The following settings are possible and can be

found in the corresponding chapter:
• Setting the date and time
• Resetting the daily kilometres and daily

operating hours

• Setting the language
• Conﬁgure Blue-Q

Symbols in the display

Messages

To show operating messages, warning

messages or error messages in the display,

text messages and symbols are used.

Symbols for operating messages

Description

Symbol

Empty ﬁeld

No display

Please wait

112

57348011850 EN - 02/2019 - 11

Summary of Contents for RX70-40









































































































































































































































































































































































































Search results

Summary of Contents for RX70-40

Reviews:

Related manuals for RX70-40

Brands by name

Popular brands

Still RX70-40, Original Instructions Manual

Search results

Summary of Contents for RX70-40

Reviews:

Related manuals for RX70-40

Brands by name

Popular brands