Still RX70-40 Original Instructions Manual Download Page 195

Page: 195 / 392

Operation

Handling loads

6210_800-015

– Drive up to the stack with the load lowered

in accordance with regulations.

– Set lift mast to vertical.
– Lift the load to the stacking height.
– Drive the truck towards the rack carefully.

6210_800-016

– Lower the load until it rests securely on the

rack.

DANGER

Risk of accident!
– Beware of any people in the danger area.
– Ensure that the roadway behind you is clear.

– Move the truck back until the fork arms can

be lowered without touching the stack.

– Lower the fork while maintaining ground

clearance.

– Tilt the lift mast backwards and drive away.

Shake function (variant)

Description

The shake function of the hydraulics is de-

signed to make it easier for the driver to per-

form tasks such as emptying containers of

bulk material. The shake function moves the

fork carriage quickly up and down via the "Lift-

ing" function.

57348011850 EN - 02/2019 - 11

183

Summary of Contents for RX70-40









































































































































































































































































































































































































Search results

Summary of Contents for RX70-40

Reviews:

Related manuals for RX70-40

Brands by name

Popular brands

Still RX70-40, Original Instructions Manual

Search results

Summary of Contents for RX70-40

Reviews:

Related manuals for RX70-40

Brands by name

Popular brands