Still RX70-40 Original Instructions Manual Download Page 229

Page: 229 / 392

Operation

Auxiliary equipment

• Load capacity Q (kg) (1)
• Lift height h (mm) (2)
• Load distance C (mm) (3)

Auxiliary equipment

Switching the lighting on and off

Driving lights

Blue-Q_039

– To switch on the parking light, press the

button (1).

The front sidelights and the rear lights light

up. On the variant with StVZO (German Road

Trafﬁc Licensing Regulations) equipment, the

licence plate lamp also lights up.
– To switch on the headlights, press the

button (1) again.

The headlights light up in addition to the

parking light.
– To switch off the driving lights, press the

button (1) again.

The driving lights go out.

57348011850 EN - 02/2019 - 11

217

Summary of Contents for RX70-40









































































































































































































































































































































































































Search results

Summary of Contents for RX70-40

Reviews:

Related manuals for RX70-40

Brands by name

Popular brands

Still RX70-40, Original Instructions Manual

Search results

Summary of Contents for RX70-40

Reviews:

Related manuals for RX70-40

Brands by name

Popular brands