Still R 07-25 Original Instructions Manual Download

Page: 98 / 246

Operation

Battery

Installing the battery cover (platform

tractors)

Lift in the battery cover.

WARNING

Risk of crushing!
When lifting and closing, limbs could become

trapped.
– Do not reach between covers and chassis.
– Only lift up and position the covers using two

people.

NOTE

On the cab version with sliding doors, the

sliding doors must be closed.

Lift in the battery cover.
– To do this, fold up the handles of the battery

cover.

– Lift in the battery cover with help from

another person.

Position and close the battery cover.
– To do this, align and position the battery

cover.

– Fold in the handles.
– Ensure that the battery cover is closed

correctly.

172780 EN - 06/2017

Summary of Contents for R 07-25























































































































































































































































Search results

Summary of Contents for R 07-25

Reviews:

Related manuals for R 07-25

Brands by name

Popular brands

Still R 07-25, Original Instructions Manual

Search results

Summary of Contents for R 07-25

Reviews:

Related manuals for R 07-25

Brands by name

Popular brands