Still R 07-25 Original Instructions Manual Download

Page: 37 / 246

Safety

Safety tests

– Observe the guidelines regarding inspec-

tion work on industrial trucks as speciﬁed by

FEM 4.004.

The operating company is responsible for

ensuring that any defects are remedied

without delay.
– Contact your service centre.

NOTE

Observe the national regulations of your

country!

Insulation testing

The insulation of the truck must have sufﬁcient

insulation resistance. For this reason, insula-

tion testing in accordance with DIN EN 1175

and DIN 43539, VDE 0117 and VDE 0510

must be conducted at least once a year as part

of the FEM testing.
The insulation testing results must be at least

the test values given in the following two

tables.
– For insulation testing, contact the autho-

rised service centre.

The exact procedure for this insulation testing

is described in the workshop manual for this

truck.

NOTE

The truck's electrical system and drive batte-

ries must be checked separately.

Test values for the drive battery

Component

Recommended

test voltage

Measurements

Nominal voltage

Batt

Test values

50 VDC

24 V

> 1200

100 VDC

48 V

> 2400

Battery

100 VDC

Batt+

Batt-

Battery tray

80 V

> 4000

172780 EN - 06/2017

Summary of Contents for R 07-25























































































































































































































































Search results

Summary of Contents for R 07-25

Reviews:

Related manuals for R 07-25

Brands by name

Popular brands

Still R 07-25, Original Instructions Manual

Search results

Summary of Contents for R 07-25

Reviews:

Related manuals for R 07-25

Brands by name

Popular brands