Still R 07-25 Original Instructions Manual Download

Page: 209 / 246

Maintenance

Maintenance intervals

Maintenance instructions

Maintenance work must be carried out in

accordance with the following maintenance

intervals. The intervals are designed for

standard use. Depending on the application

conditions of the truck, shorter maintenance

intervals can be set, on agreement with the

operating company.
These factors may call for shorter mainten-

ance intervals:
• Contaminated, poor quality roads
• Dusty or salty air
• High air humidity
• Extremely high or low ambient tempera-

tures, or extreme changes in temperature

• Multi-shift operation with a high duty cycle
• Speciﬁc national regulations for the truck or

individual components

For maintenance tasks, only use original

spare parts, and only use consumables

that have been prescribed in the overview

of consumables.

172780 EN - 06/2017

199

Summary of Contents for R 07-25























































































































































































































































Search results

Summary of Contents for R 07-25

Reviews:

Related manuals for R 07-25

Brands by name

Popular brands

Still R 07-25, Original Instructions Manual

Search results

Summary of Contents for R 07-25

Reviews:

Related manuals for R 07-25

Brands by name

Popular brands