manualshive.com logo in svg

Still R 07-25, Original Instructions Manual

"Still R 07-25 Original Instructions Manual is a comprehensive and essential resource for users of the Still R 07-25 equipment. This manual provides detailed information, step-by-step instructions, and useful tips for optimal performance. Download it for free from manualshive.com to unleash the full potential of your Still R 07-25."

Share
Download
background image

Table of contents

g

1 Foreword

Your industrial truck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
CE labelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Information about the documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Scope of the documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Information symbols used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Issue date and topicality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Copyright and trademark rights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Explanation of the cross-references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Environmental considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Disposing of components and batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2 Introduction

Use of the truck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Intended purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Inadmissible use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Parking in temperatures below -10°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Place of use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Residual risk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Residual dangers, residual risks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Danger to employees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Overview of hazards and countermeasures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Special risks associated with using the truck and attachments . . . . . . . . . . . . . . . . . . . 17

3 Safety

Definition of responsible persons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Operating company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Specialist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Basic principles for safe operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Tyres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Non-original parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Gas spring and accumulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Drivers with medical devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Modifications and retrofitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Insurance cover on company premises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Damage, defects and misuse of safety systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

172780 EN - 06/2017

III

Summary of Contents for R 07-25























































































































































































































































Reviews:

No comments

Related manuals for R 07-25

TILMOR 520Y Diesel Quick Start Manual preview
520Y Diesel
Brand: TILMOR Pages: 2
ICS LT 80 Assembly Manual And Use And Care preview
LT 80
Brand: ICS Pages: 18
Homelite T-10 Illustrated Parts List preview
T-10
Brand: Homelite Pages: 24
Jenn-Air W10242571A Use And Care Manual preview
W10242571A
Brand: Jenn-Air Pages: 28
S.E.P. REV. 1000 Diesel (2+2) Use And Maintenance Manual preview
REV. 1000 Diesel (2+2)
Brand: S.E.P. Pages: 32
GE MONOGRAM ZCG3300 WW Installation Instructions Manual preview
MONOGRAM ZCG3300 WW
Brand: GE Pages: 16
Afron HD1100N Parts Manual preview
HD1100N
Brand: Afron Pages: 39
Case FARMALL 105U EP Service Manual preview
FARMALL 105U EP
Brand: Case Pages: 61
Sears 917.25010 Assembly And Operating Instructions Manual preview
917.25010
Brand: Sears Pages: 20
Soucy S-TECH 1000X User Manual preview
S-TECH 1000X
Brand: Soucy Pages: 73
Honda H5518H Owner'S Manual preview
H5518H
Brand: Honda Pages: 117
Honda H6522 Owner'S Manual preview
H6522
Brand: Honda Pages: 127
GOLDONI 40 Operation And Maintenance preview
40
Brand: GOLDONI Pages: 42
GOLDONI FH0085 Operation And Maintenance preview
FH0085
Brand: GOLDONI Pages: 153
GOLDONI MY SPECIAL 14 Operator'S Manual preview
MY SPECIAL 14
Brand: GOLDONI Pages: 186
GOLDONI IDEA 26 ALTO Operation And Maintenance preview
IDEA 26 ALTO
Brand: GOLDONI Pages: 185
GOLDONI 30HST Operation And Maintenance preview
30HST
Brand: GOLDONI Pages: 181
Ningbo Benye 35 Series Manual preview
Benye 35 Series
Brand: Ningbo Pages: 61

Brands by name

Popular brands

Load more brands