Still R 07-25 Original Instructions Manual Download

Page: 99 / 246

Operation

Battery

Removing the engine cover (platform

tractors)

Open and lift the engine cover.

WARNING

Risk of crushing!
When lifting and closing, limbs could become

trapped.
– Do not reach between covers and chassis.
– Only lift up and position the covers using two

people.

Open and lift the engine cover.
– To do this, fold up the handles of the engine

cover.

– Lift the engine cover with help from another

person.

Lift out the engine cover.
– To do this, lift out the engine cover with help

from another second person.

– Remove the engine cover from the working

area.

– Ensure that no parts can fall into the engine

compartment.

172780 EN - 06/2017

Summary of Contents for R 07-25























































































































































































































































Search results

Summary of Contents for R 07-25

Reviews:

Related manuals for R 07-25

Brands by name

Popular brands

Still R 07-25, Original Instructions Manual

Search results

Summary of Contents for R 07-25

Reviews:

Related manuals for R 07-25

Brands by name

Popular brands