Still R 07-25, Original Instructions Manual

Page: 201 / 246

Maintenance
6
Servicing
127-127
Replacing the gearbox breather filter
– Switch off the key switch.
– Open and secure the bonnet.
– Remove and dispose of both breather
filters.
– Install new breather filters.
Check security of the wheel bolts
– After removing a wheel, the security of the
bolts MUST be checked within 50 hours of
operation.
For effective wheel fixing, tighten the wheel
bolts diametrically to 195 Nm
NOTE
If it is found necessary to tighten the wheel
bolts to the correct torque, then they must be
checked again after 50 hours. Repeat the
tightening procedure every 50 hours until the
correct torque is consistently obtained.
172780 EN - 06/2017 191