Still R 07-25, Original Instructions Manual

Page: 179 / 246

Maintenance
6
Providing access to maintenance points
Secure the engine cover in the lifted position.
– To do this, release the support rod (1) from
the holder (in the engine cover).
– Latch the support rod in the safety plate (2)
such that the support rod is locked in place
and secured.
– Ensure that the engine cover is secured
against falling shut unintentionally.
Closing the engine cover
Release the engine cover.
WARNING
Risk of crushing!
When lifting and closing, limbs could become
trapped.
– Do not reach between covers and chassis.
Release the engine cover.
– To do this, unlatch the support rod (1) from
the safety plate (2) and position the support
in the holder (in the engine cover).
Close the engine cover.
– To do this, press down the engine cover
against the pressure of the gas spring and
hold the engine cover closed.
– Tighten the locking screw (1) by turning the
screw clockwise.
– Ensure that the engine cover is closed
correctly.
172780 EN - 06/2017 169