Still FS-X33, Original Instructions Manual

Page: 72 / 94

5
Maintenance
Maintenance schedule
• Check the drive wheels for condition and
wear.
• Check that the drive wheels, wheel nuts
(195 Nm) and binding are securely at-
tached.
• Check the traction motor bearing operating
noise and change the bearing as neces-
sary.
• Only for cold store trucks*: lubricate the
steering turntable bearing with multi-
purpose grease.
Steering
• Check steering turntable bearing for ease
of movement and wear.
• Check that the steering motors are securely
attached.
• Check the steering gears and steering
pinion for condition and check that they
are sufficiently lubricated.
• Check the play of the gears.
• Check the steering motor bearings operat-
ing noise and replace if necessary.
• Check the steering for ease of movement
when jacked up (disconnect the battery
male connector).
• Check the setting of the electrical steering
by carrying out a functional test.
• Steering wheel module adjustment: check
the latch for condition and function.
Brake
• Check parking brake and service brake for
function and setting.
• Check the reverse brake for function.
• Check the thickness and condition of the
brake linings and change as necessary.
• Blow out the brake lining with oil-free air
(caution: abrasion is hazardous to your
health, use a protective mask).
• Check the brake clearance and adjust as
necessary (0.4–1.0 mm).
• Test brake retardation and/or braking
distance for compliance with the minimum
values after each adjustment.
Chassis
66 51328042507 [EN]