Still FS-X33, Original Instructions Manual

Page: 71 / 94

Maintenance
5
Lubrication plan for cold store application
every 2,000 hours or every 12 months
• Change the hydraulic oil
Lubrication plan for cold store
application
For lubrication tasks in accordance with the
lubrication plan, we recommend the following
low-temperature lubricants:
Area of application
Lubricant
Filling bearings with grease
Lubricating sliding faces
Almetyn SF2, ID no. 8052 346 (aluminium
complex soaps with paraffin-based base oil)
Lubricating moving parts, e.g. levers, push-rod
switches of limit switches, turning handles etc. Kompranol N74, ID no. 8050 077
Hydraulics
Fuchs Renolin MR310 hydraulic oil, ID no.
8036 239 (Factory fill not mixable with other
hydraulic oils)
Gearbox
SAE 75W-90 gearbox oil, semi-synthetic, ID
no. 8036 929, oil quality must conform at least
to API GL5 or MIL-L-2105-B.
For protecting the fine pitch thread during
cylinder assembly
Rivolta G. W. F. spray, ID no. 8050 078,
thread-loosening, anti-wear and lubricating
solution
Chain spray
High performance chain spray, ID no. 8052
453
.
Maintenance schedule
This maintenance schedule is valid for normal
loading during single-shift operation. For
heavy-duty and/or multi-shift operation, the
intervals must be reduced accordingly. Please
observe the information in the section entitled
Area of application.
Maintenance every six months or every
1000 hrs
Traction drives
• Check the gearbox for noise and leakages.
• Initial gearbox oil change.
• Check the tightness of the screw connection
to the drive units (note the torque).
51328042507 [EN] 65