Still FS-X33, Original Instructions Manual

Page: 59 / 94

Operation
4
The display and its functions
0
Standard lead
battery
1
Performance-
enhanced battery
(CSM)
2
Mat battery (AGM)
3 - 5
Reserved for special
batteries
batt_cap - Setting the battery capacity
The corresponding four-digit number se-
quence is entered for the battery capacity.
After selection of the
batt_cap
menu item,
the first of the four entry positions starts to
flash in the display. A value of only "0" or
"1" can be selected here. Selection with the
arrow button
(2) or (3). Confirm selection by
briefly pressing the OK button (1). After this
confirmation, the second position starts to
flash. A value of "0" to "9" can be selected
here. Selection with the
arrow button
(2) or (3).
Confirm selection by briefly pressing the
OK
button (1).
After this confirmation, the third position starts
to flash. A value of "0" to "9" can be selected
here. Selection with the
arrow button
(2) or (3).
Confirm selection by briefly pressing the OK
button (1).
After this confirmation, the first three positions
start to flash. Here the selection can only
be confirmed by briefly pressing the
OK
button (1). The menu then switches to the
brightness
submenu.
brightness - Setting the brightness of the
display
There are 16 levels for setting the brightness
of the display lighting. Switch using the
arrow button (2) or (3). Confirm selection by
briefly pressing the
OK
button (1).
display_unit - Setting the display type for the
display
The speed display can be switched from
kilometres per hour
[km/h]
to miles per
hour
[mp/h]
, or it can be hidden completely.
Switch using the
arrow button
(2) or (3). Confirm
selection by briefly pressing the
OK
button (1).
51328042507 [EN] 53