Still EXG-10 Original Instructions Manual Download

Page: 92 / 152

Maintenance

Maintenance safety instructions

Servicing and maintenance measures

To avoid accidents during servicing and

maintenance operations, take all necessary

safety measures, such as, for example:

ensuring that there is no risk of the truck

moving or starting up unexpectedly (remove

the battery connector).

Working on the electrical equipment

Operations on the truck’s electrical system

must only be carried out when there is no volt-

age supply. Operating checks, testing and

adjustment of parts supplied with voltage must

only be carried out by qualiﬁed personnel who

have received detailed instructions and have

been authorised to perform this work. They

must take the required precautionary mea-

sures. Rings, metal bracelets etc. must be

removed before carrying out any operations

on electrical components.

To avoid damaging electrical equipment

including electrical components, such as the

traction controller, these must be removed

from the truck before carrying out any electric

welding operations.
Operations on the electrical system are per-

mitted only with the consent of the manufac-

turer.

Safety devices

Reﬁt and check all safety devices for proper

operation after maintenance and servicing.

1170 801 15 09 [EN]

Summary of Contents for EXG-10

























































































































































Search results

Summary of Contents for EXG-10

Reviews:

Related manuals for EXG-10

Brands by name

Popular brands

Still EXG-10, Original Instructions Manual

Search results

Summary of Contents for EXG-10

Reviews:

Related manuals for EXG-10

Brands by name

Popular brands