Still EXG-10, Original Instructions Manual

Page: 64 / 152

4
Use
Handling loads
Stacking a load
DANGER
Check that the load does not exceed the maximum
capacity of the truck in relation to the lift height.
– Carefully drive the machine to the required
location.
– Raise the forks clearly above the level
where the load is to be placed.
– Tilt the mast vertically.
– Drive the truck forward into the racking.
– Lower the load until the fork arms are free.
– Withdraw the machine in a straight line.
– Lower the forks again to several centime-
tres from the ground.
DANGER
Personnel must not stand under or near the truck
when the load is in the raised position.
Picking up a load at a height
DANGER
Check that the load does not exceed the maximum
capacity of the truck in relation to the lift height.
Check the pallet is in good condition.
– Carefully drive the machine to the required
location.
– Tilt the mast vertically.
– Lift the forks to the height of the pallet.
– Move the fork forward carefully under the
pallet.
– Lift the forks until the pallet moves away
from the racking.
– Tilt the mast as far back as possible.
– Reverse the truck to free the pallet.
– Lower the load to a few centimetres from
the ground.
58 1170 801 15 09 [EN]