Still EXG-10, Original Instructions Manual

Page: 108 / 152

5
Maintenance
Maintenance every 1000 hours
Electrical equipment, checking condition
of battery cables, terminals and connec-
tors
– Check that the cable insulation is undam-
aged and that there are no signs of over-
heating at the connections.
– Check that the + and - output terminals are
not sulphated (presence of white salt).
– Check the condition of the power connector
contacts and the presence of the keying pin.
CAUTION
Deterioration or destruction of the equipment
Always replace any damaged battery connector
or there is a risk that electronic components may
be damaged. Always use male and female battery
connectors of the same brand.
CAUTION
Deterioration or destruction of the equipment
The points mentioned above can cause serious
incidents. Request assistance from our service
engineers as quickly as possible.
Electromagnetic brake, checking the
brake assistance circuit for leaks
– Inspect the brake assistance hydraulic
circuit: hose and connections.
– If necessary, tighten the unions (1) of the
hose (2):
• tightening torque: 40 Nm
• on the pump unit: 35 Nm.
– Wipe away any traces of oil before they
reach the brake disc pads.
In the event of leakage, stop the truck and
contact the service engineer.
102 1170 801 15 09 [EN]