Still EXG-10 Original Instructions Manual Download

Page: 10 / 152

Introduction

Your industrial truck

EC declaration of conformity

Declaration

STILL GmbH
Berzeliusstrasse 10
22113 Hamburg

GERMANY

We declare that the machine

Industrial truck

according to these operating instructions

Model

according to these operating instructions

conforms to the latest version of the Machinery Directive 2006/42/EC.

Personnel authorised to compile the technical documents:

See EC compliance declaration

STILL S.A.S.

The manufacturer declares that the truck

complies with the requirements of the EC

directives valid at the time of marketing. This is

conﬁrmed by the EC declaration of conformity

and by the EC labelling on the nameplate.
An independent structural change or addition

to the truck can compromise safety, thus

invalidating the EC declaration of conformity.
The EC declaration of conformity must be

carefully stored and made available to the

relevant authorities.

1170 801 15 09 [EN]

Summary of Contents for EXG-10

























































































































































Search results

Summary of Contents for EXG-10

Reviews:

Related manuals for EXG-10

Brands by name

Popular brands

Still EXG-10, Original Instructions Manual

Search results

Summary of Contents for EXG-10

Reviews:

Related manuals for EXG-10

Brands by name

Popular brands