Still EXG-10, Original Instructions Manual

Page: 51 / 152

Use
4
Driving
Driving
Start-up
– Open the battery cover (1).
– Plug in the battery connector.
– Close the battery cover (1).
– Pull the emergency off switch to the raised
position (2).
– Turn the switch key (3) to the right or enter
the start-up PIN code on the multifunction
indicator (4) depending on the version.
– The multifunction indicator (4) starts up.
NOTE
Always adjust the truck speed to suit your
route, any hazards and the load. Use the
pallet stacker on ground that has the correct
surface and hardness.
Emergency off switch
– During normal truck operation, the emer-
gency off switch (2) must be pulled out.
– In case of danger, press the switch (2) to
break the electrical circuit and apply the
electromagnetic brake.
Direction of travel
On a pallet stacker, the conventional controls
for the drive direction are:
• Forward travel: (5) - Tiller direction
• Reverse travel: (6) - Fork direction
1170 801 15 09 [EN] 45